How To Fix Crack Under Door
How to Fix a Crack in a Hollow Wood Door
- Comments: 1
- Favorites: 0
- Completions: 1
                              
Time Required
30 minutes - 1 hour
- How to Fix a Crack in a Hollow Wood Door 9 steps
Introduction
This Fast Fix can be used to patch a crack in any hollow wood door. The materials that will need to be purchased include body/wood filler, sandpaper/sanding sponge, paint, putty knife, and a paint brush. To prevent any hazards, gloves and a face mask are recommended. Overall, this Fast fix should take no longer than an hour to complete and should not cost over $10 when purchasing the required materials.
Parts
No parts specified.
-                             -                                                                               Clean and dust the affected area with a paper towel, rag, or brush. 
 
-                                                                               
-                             -                                                                         Sand the affected area with a 60/80 grit sanding sponge. 
-                                                                         Any type of sand paper or sanding sponge will work on wood surfaces. 
-                                                                         It is recommended to place newspaper under the door to keep the sand/dust contained. 
 
-                                                                         
-                             -                                                                         Remove any sand/dust with a paper towel. 
-                                                                         It is recommend to use gloves to prevent any minor splinters. 
-                                                                         It is also recommended to use a face mask to prevent inhaling any dust/sand. 
 
-                                                                         
-                             -                                                                         Use putty knife to apply body filler until an even layer is formed. 
-                                                                         Start with a small amount and then add more if needed. 
-                                                                         A smaller putty knife allows for easier application in creases and folds. 
 
-                                                                         
-                             -                                                                         Remove any excess body filler with putty knife 
-                                                                         Its okay if the surface is uneven, you will use sandpaper to smooth the surface in a later step. 
 
-                                                                         
-                             -                                                                         Allow to dry (or use a blow dryer for lesser wait time). 
-                                                                         More expensive brands of body filler will dry faster. 
 
-                                                                         
-                             -                                                                               Gently sand the surface. 
-                                                                               Gloves and a face mask are highly recommended but not required for this step. 
-                                                                               Newspaper is also recommended to contain any sand/dust. 
-                                                                               Reapply body filler, allow to dry, and re-sand if surface remains uneven. 
 
-                                                                               
-                             -                                                                         Use a similar toned paint to paint the area if any discoloration exists. 
-                                                                         Wood paint is ideal for wood doors. 
 
-                                                                         
-                             -                                                                         Allow to dry. 
-                                                                         Your door should now look neutral and clean. 
-                                                                         A blow dryer is recommended for faster drying. 
 
-                                                                         
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
0 Comments
How To Fix Crack Under Door
Source: https://www.ifixit.com/Guide/How+to+Fix+a+Crack+in+a+Hollow+Wood+Door/119880
Posted by: hirschthang1994.blogspot.com

0 Response to "How To Fix Crack Under Door"
Post a Comment